top of page
Temp. & Humid. Chambers (TH-PE) from The Cleanroom Market

Temp. & Humid. Chambers (TH-PE)

The best choice for the limited laboratory space! Tabletop chamber is beneficial for space efficiency.


Different specifications and extras available. 

Control range

  • Temperature range from 0 to 120°C
    Humidity range from 30 to 95% RH



  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Uniform temperature and humidity control guarantees reliable test result.
  • Air-tight door closure with perfect sealed packing.
    – Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
  • Maintenance of water supply is easily performed.
    – Water level condition is easy to check by the water level indicator on the front control panel.
  • Water supply during operation is also available for long term test purposes.
  • Direct water system provides user great convenience when performing long-term tests. (optional)



  • Built in door lock with a key.
  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.



  • Compact design and quite operation.
  • Three different size models are available to suit user’s need.
  • Corrosion resistance stainless steel chamber.
  • Operating condition is clearly noticed by front LED indicator.
    – Three different colored lights show each status of running, stop, and power off condition.
  • Clear observation of samples.
    – Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
  • Cable port for introduction of external probes or wires.
    – 50mm diameter cable port comes standard on the left side of the unit.
    – Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
  • Two type of stands for space-saving. (optional)
    – Single stand with a drawer provides enough storage space.
    – Two step stand accepts loading two units to save limited space.
  • User friendly LCD controller.
    – Set value and present value are clearly visible together on display.
    – Operating progress visible in graph mode allow for direct data interpretation.
    – Temperature and other operating parameters recorded with use of selectable recorder. (optional)
  • Sufficient programmable control support.
    Description No
    Programmable pattern capacity 10
    pattern repeat time 999
    Max. Segments per a pattern 100
    Available max. segments* 100
    Programmable process time per a segment 0 to 99 hr. 59 min.

    * Even though the max. segments per a pattern are 100, available total segments are up to 100 not 1000, so you need to arrange the number of segment and patterns properly.


  • Computer interface.
    – RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
    – Program patterns are simple to set with the use of our software.
    – Storage of program information, backup of value settings, recovery, temperature, humidity values.
    – RS-232 communication port comes standard.
bottom of page