Temp. and Humid. Chambers (TH-G)

Temp. and Humid. Chambers (TH-G)

Standard environmental test chamber. Highly interactive LCD controller, beneficial for sophisticated long-term test cycles.

 

Different specifications and extras available. 

Control range

  • Temperature range from -40 to 150°C Humidity range from 25 to 95% RH

 

Performance

  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
  • Water recycling and filtering system reduce water consumption for longer operation.
  • Air-tight door closure with perfect sealed packing.
    – Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
    – Two-point door latch also enhances tightness to door closure.
  • Energy efficiency is achieved by optimization of the insulation system.
    – Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.

 

Safety

  • Built in door lock with a key.
  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.

 

Convenience

    • Spacious chamber volume with a maximum capacity of 1500L.
      – Various volume sizes, available to suit any users’ need.
    • Corrosion resistance stainless steel chamber and electric polished humidification tank.
    • Maintenance of water supply are easily performed with a front water tank.
      – Portable water container makes supplying water convenient.
    • Water supply during operation is also available for long term test purposes.
    • Direct water system provides user great convenience when performing long-term tests. (optional)
    • Clear observation of samples.
      – Tempered glass door with built in heating wire.
      – Energy efficient, long life span LED lighting.
      – Wider view, inner glass door is available for monitoring of samples. (optional)
    • Cable port for introduction of external probes or wires.
      – 50mm diameter cable port comes standard on the left side of the unit.
      – Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
    • Casters for easy mobility during installation or relocation.
    • User friendly LCD controller.
      – 5.7 inch colorful interactive touch type LCD controller.
      – Set value and present value are clearly visible together on display.
      – Operating progress visible in graph mode allow for direct data interpretation.
      – Built-in SD card drive.
      – Trilingual support. (English / Chinese / Korean)
      – Temperature and other operating parameters recorded with use of selectable recorder. (optional)
      – Sufficient programmable control support.
Description No
Programmable pattern capacity 120
Pattern repeat time 999
Max. segments per a pattern 100
Available max. segments* 1200
Programmable process time per a segment 0 to 999hr.
59 min. 59 sec.

* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.

 

  • Computer interface

– RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
– Program patterns are simple to set with the use of our software.
– Storage of program information, backup of value settings, recovery, temperature, humidity values.
– RS-232 communication port comes standard.

T.C.M. The Cleanroom Market FZC

We are Social !

  • YouTube Social  Icon
  • Instagram Social Icon
  • LinkedIn Social Icon

© 2018 by TCM The Cleanroom Market