top of page
Specific Purpose Chambers (TH-CR) from The Cleanroom Market

Specific Purpose Chambers (TH-CR)

Specially designed for processes requiring clean and controlled environmental test conditions.

ISO class 5 air cleanliness as per ISO 14644-1).

Different specifications and extras available. 


  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Exhaust duct is located at the upper right side of the unit to avoid influence other devices.
  • Built-in differential pressure gauge for easy observation of HEPA filter condition.



  • Silicone-free construction for clean environment.
  • Corrosion resistance stainless steel chamber.
  • Maintenance of water supply are easily performed with a front water tank.
    – Water level check indicated by water level bar in the tank.
  • Water supply during operation is also available for long term test purposes.
  • Direct water system provides user great convenience when performing long-term tests. (optional)
  • Clear observation of samples.
    – Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
    – Inner glass door with entry ports for handling samples without affecting inner chamber temperature and humidity. (optional)
  • Cable port for introduction of external probes or wires.
    – 50mm diameter cable port comes standard on the left side of the unit.
    – Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
  • Casters for easy mobility during installation or relocation.
  • User friendly LCD controller.
    -5.7 inch colorful interactive touch type LCD controller.
    – Set value and present value are clearly visible together on display.
    – Operating progress visible in graph mode allow for direct data interpretation.
    – Temperature and other operating parameters recorded with use of selectable recorder. (optional)
    – Sufficient programmable control support.
    – Programming operation.
Description TH-ICH
Programmable pattern capacity 120
pattern repeat time 999
Max. Segments per a pattern 100
Available max. segments* 1200
Programmable process time per a segment 0 to 99 hr. 59 min.

* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment and patterns properly.


  • Computer interface.
    – RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
    – Program patterns are simple to set with the use of our software.
    – Storage of program information, backup of value settings, recovery, temperature, humidity values.
    – RS-232 communication port comes standard


Safety Features

  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.
bottom of page